Generally speaking, the manufacturers of iron fences have considered the characteristics of the outdoor environment during the production process, and strive to achieve anti-rust, wear resistance, corrosion resistance, and anti-exposure in the selection of materials and coatings. Therefore, users only need to purchase Look for well-known manufacturers when using iron fences. Don't be greedy to buy some iron facilities of substandard quality. In order to extend the life of outdoor wrought iron facilities, the following points should be maintained:

1. Avoid bumps.
This is a point to notice for wrought iron products. Wrought iron products should be handled with care during the handling; the place where the wrought iron products are placed should be the place where hard objects are not often touched; the ground where the wrought iron products are placed should also be kept flat and the wrought iron guardrails should be kept flat. Ensure that it is firm during installation. If it shakes unstable, it will deform the wrought iron fence over time and affect the service life of the wrought iron fence.

2. Dust should be removed regularly.
The outdoor dust is flying, accumulating day by day, and a layer of floating dust will fall on the iron art facilities. It will affect the color of wrought iron art, and cause damage to the protective film of wrought iron art. Therefore, outdoor wrought iron facilities should be wiped regularly, and soft cotton fabrics are generally better.

3. Pay attention to moisture.
If it is only the general outdoor air humidity, you can rest assured of the rust resistance of the iron fence. If it is foggy, use a dry cotton cloth to wipe the water droplets on the ironwork; if it is rainy, wipe the water droplets dry in time after the rain stops. As acid rain is raging in most areas of our country, the rainwater remaining on the ironwork should be wiped off immediately after the rain.

4. Keep away from acid and alkali
Acid and alkali are the "number one killer" of iron fence. If the iron fence is accidentally stained with acid (such as sulfuric acid, vinegar), alkali (such as methyl alkali, soapy water, soda water), immediately rinse off the dirt with clean water , And then wipe dry with a dry cotton cloth.

5. Eliminate rust
If the wrought iron fence is rusty, don't use sandpaper to polish it on your own terms. If the rust is small and shallow, you can apply cotton yarn dipped in engine oil to the rust. Wait for a while and wipe it with a cloth to remove the rust. If the rust has expanded and become heavier, you should ask the relevant technicians to repair it.